For the Mustang, racing notoriety came early. By 1965, the Mustang, still very much in its infancy, began making a...
If there is one fact that anyone can count on, it is that Carrol Shelby would always deliver when asked...
1965 Ford Mustang VIN Decoder VIN Decoder VIN Location The VIN number is found under the hood on top of...
1965 Ford Mustang Options & Prices When the first Mustangs rolled off the assembly line they consisted of only coupes...
1965 Ford Mustang Production & Sales Numbers A total of 559,451 Mustangs were produced for the 1965 model year. The hardtop was the...
1965 Mustang Colors While we already outlined all the colors for the 1965 Mustang in our in depth guide, we...
1964.5 Mustang Engine Information – 170 cubic inch I6 (2.8 L Inline 6) 170 Cubic inch engine was only used...
1965 Mustang Engine Information – 289 cubic inch V-8 (4.7 L Windsor V8) The 289 Windsor V8 This is Ford’s...
1965 Mustang Engine Information – 260 cubic inch V8 This was the first V8 installed in the Mustang, its block...
1965 Ford Mustang Carburetor Information The following information pertains to 1964 1/2 to 1965 Ford Mustangs; Year Vehicle Trans A...
1965 Ford Mustang Axle Information & Ratios The first table is the code and gear ratio. If you know your...
1965 Ford Mustang Mechanical Information & Drawings Suspension No data compiled yet Transmissions The base transmission was the 3 Speed...
1965 Ford Mustang Carburetor Information The 1965 Autolite 2100 series carburetor was used on the 260 and 289 cubic inch...
1965 Ford Mustang Carburetor Information...
1965 Ford Mustang Carburetor Information The following information pertains to 1964 1/2 to 1965 Ford Mustangs; Year Vehicle Trans A...
1965 Ford Mustang Exhaust Information & Drawings We have rounded up detailed technical drawings for all the exhausts available for...
1965 Ford Mustang Distributor Information & Specs 1965 Mustang Distributor General information Ford used 3 kinds of distributors on 1966;...
1965 Ford Mustang Body Information & Diagrams 1965 Mustang Body Diagrams 1965 Mustang Convertible Top Drawings 1965 Mustang Hood Drawings...
Emissions in the 1965 mustang consisted of the use of a PCV valve. Although Ford did use Thermactor devices in...
1965 Mustang Brakes Information & Drawings Technical drawings of the brake system for the 1965 Mustang. We have included drawings...
Electrical System Drawings & Harnesses for the 1965 Mustang DIY Mustang fans rejoice because we have found a bunch of...
Background of 1964 1/2 Mustangs Mustangs built between March 1964 and August 17, 1964 were identified as 1964½ Mustangs, or...
Few could have predicted how robust the Ford Mustang’s early sales figures would be, upon its release in 1964. A...
1965 Mustang Engine Information – Thriftpower Inline 6 (200 cubic inch) The 200 cubic inch, 120 horsepower engine was used...
