The 200 cubic inch, 120 horsepower engine was used in Mustangs from 1965 -1970. It was an inline 6 cylinder engine with the block and and heads painted black (paint code 903), valve covers and air cleaner were orange (paint code 912). Somewhere in mid 1965, FORD started painting the blocks medium blue. The exhaust was a single exhaust pipe with a single inlet/outlet transverse mounted muffler behind the axle and in front of the gas tank.
120 hp at 4400 RPM and 190 ft/lbs torque at 2400 RPM
1 – 5 – 3 – 6 – 2 – 4
4.5 pounds pressure
Engine Torque Specifications
All torque specifications provided in this table are those recommended by FORD. If you use special bolts, follow the torque specifications provided by the manufacturer. I recommend that you use the 3 step torque technique where you torque down the bolts in three equal steps. Once you have reached the maximum recommended torque setting, go around one more time. Do not torque in a circular pattern. Always torque cross to cross.